Du verwendest einen veralteten Browser. Es ist möglich, dass diese oder andere Websites nicht korrekt angezeigt werden.
Du solltest ein Upgrade durchführen oder einen alternativen Browser verwenden.
Du solltest ein Upgrade durchführen oder einen alternativen Browser verwenden.
My Cable car model ''Gletscherexpress''
- Ersteller Annedijkstra
- Erstellt am
Karte im zweiten Fenster
Annedijkstra
Massada (5m)
- Registriert
- 15. Juli 2008
- Beiträge
- 31
- Reaktionspunkte
- 0
@ vonroll101: I have make a video of the wheels. The screws are not good, and i'm going to buy this:
And i have now this:
You know the last picture is not good because these going loose.
I have temporarily the screws loosing up and this is the result:
____
@4CLD_Gampebahn: I'm going this year to Sölden, in december, but i don't know which week. I'm ask my parents haha
Best regards, Anne
ps. It is very hot in Holland (37 C), and it's to hot to work on my cable car
And i have now this:
You know the last picture is not good because these going loose.
I have temporarily the screws loosing up and this is the result:
____
@4CLD_Gampebahn: I'm going this year to Sölden, in december, but i don't know which week. I'm ask my parents haha
Best regards, Anne
ps. It is very hot in Holland (37 C), and it's to hot to work on my cable car
vonroll101
Vogelsberg (520m)
- Registriert
- 10. Jan. 2009
- Beiträge
- 528
- Reaktionspunkte
- 0
I'll Take a short video of my VonRoll Vr101 Tower batterys.Have you tried using loc tight on your main support arms?Thats what I had to do on my 12 Sheave roller batterys.
Annedijkstra
Massada (5m)
- Registriert
- 15. Juli 2008
- Beiträge
- 31
- Reaktionspunkte
- 0
Hello !
My cablecar works fine but the cable is something slipping by the wheel in the beginning station. I try to use rubber bands but that works something good and something bad..
You can see my website (and of course the webcam) for the progress.
Best regards, Anne
My cablecar works fine but the cable is something slipping by the wheel in the beginning station. I try to use rubber bands but that works something good and something bad..
You can see my website (and of course the webcam) for the progress.
Best regards, Anne
Petz
Ski to the Max
- Registriert
- 22. Nov. 2002
- Beiträge
- 10.493
- Reaktionspunkte
- 456
Some weeks ago i have fabricated for AF - user BJS a turning wheel with a silicon coated rope groove but unfortunately until now his station isn´t ready to run so we have no experiences with it.
If you want to try completely remove the colour in the groove with a rough sandpaper, fill it with silicone and smooth it carefully with a piece of oiled sheet metal or plastic that you hold at the turning wheel when it runs. Then let the silicon harden some days.
The distance between the two rope will get a bit larger so you had to adjust the rollers in the station too.
If you want to try completely remove the colour in the groove with a rough sandpaper, fill it with silicone and smooth it carefully with a piece of oiled sheet metal or plastic that you hold at the turning wheel when it runs. Then let the silicon harden some days.
The distance between the two rope will get a bit larger so you had to adjust the rollers in the station too.
Annedijkstra
Massada (5m)
- Registriert
- 15. Juli 2008
- Beiträge
- 31
- Reaktionspunkte
- 0
A new video is available
I'm working on my cableway and it gets better and better
Best regards, Anne
(ps. The name for my cableway is now Giggijochbahn, and not Gletscherexpress
)
I'm working on my cableway and it gets better and better
Best regards, Anne
(ps. The name for my cableway is now Giggijochbahn, and not Gletscherexpress